SECTION 5
DISASSEMBLY AND ASSEMBLY
45
Control Panel
1. Open the Top Cover and Ink Tank
Door.
2. Remove (2) screws at top [A] and
(2) screws from bottom [B] of
Control Panel.
3. Carefully lift the Control Panel
Assembly off of the Printer.
NOTE: Be careful of stretching or
breaking wiring harnesses, cables
and connectors.
4. Reassemble in reverse order.
Top Cover
1. Open the Top Cover.
2. Remove (2) screws [A] from the rear of
the Top Assembly.
3. Remove the Top Cover from the studs.
4. Reassemble in reverse order.
To Next Page
Loading...
Need help?
General
