Nipro SURDIAL - Procedures for Machine Operation; Machine SW on; Prerinse

13-4
13.2 Procedures for machine operation
1. Turn on power breaker of the machine.
2. Execute prerinsing operation.
3. Execute dialysis.
4. Execute postrinsing.
5. Turn off power breaker of the machine.
13.2.1 Machine SW ON
(1) Check correct connection of power plug to receptacle.
(2) Check no lighting of power lamp.
(3) Turn on power breaker placed at rear side of the machine.
z Power lamp is ON.
z Information is displayed on operation panel.
ＳＩＮＧＬＥ ＰＡＴＩＥＮＴ ＤＩＡＬＹＳＩＳ ＭＡＣＨＩＮＥ
ＳＵＲＤＩＡＬ ＴＹＰＥ Ⅱ
ＮＩＰＲＯ ＣＯＲＰＯＲＡＴＩＯＮ ＲＡＭ：ＯＫ
ＲＯＭ Ｖｅｒ．３．００／０４ ＲＯＭ：ＯＫ
Ｆ・１ Ｆ・２
Ｆ・３
Ｆ・４ Ｆ・５
ＮＯＴＥ
z When recovery from power failure is notified, press [MUTE] SW and [RESET] SW to reset
the machine functions.
13.2.2 Prerinse
(1) Check ON of [DIALYSIS] SW lamp.
(2) Press [DIALYSIS] SW.
z [DIALYSIS] SW lamp is OFF.
z Rinse menu screen is displayed.
［ＲＩＮＳＥ ＭＥＮＵ］
ＲＩＮＳＥ１：ＷＡＴＥＲ ＲＩＮＳＥ３：ＡＵＴＯ１ Ｃ＆Ｄ
ＲＩＮＳＥ２：ＣＨＥＭＩＣＡＬ ＲＩＮＳＥ４：ＡＵＴＯ２ Ｃ＆Ｄ
ＲＩＮＳＥ１ ＲＩＮＳＥ２ ＲＩＮＳＥ３ ＲＩＮＳＥ４ ＤＩＳＰ．
Ｆ・１
Ｆ・２
Ｆ・３
Ｆ・４ Ｆ・５
(3) Follow the procedures specified in Chapter 14 to rinse the machine.
 ＣＡＵＴＩＯＮ
z Rinse the machine before starting dialysis to prevent cross infection among patients.