Nipro SURDIAL - Unpacking and Check of Contents

6-4
6.2. Unpacking and check of contents
WARNING
 Unpacking should be performed by at least 2 operators. Otherwise bone fracture may be
caused by drop of the machine on body.
NOTE
 Tightening components such as screws and nuts are mm size. If missed, use those of the
same mm size.
(1) Just after unpacking, check conformance of manufacturing No. indicated on the package to
that on the machine.
(2) Check whether the following accessories are provided and whether the machine and
accessories are not damaged.
(a) Hanger (×1)
(b) Main lamp (×1)
(c) Tray (×1)
(e) IV pole (×1)
+O-ring (×2)  (d) Main lamp cap (×1)
Fig. 6-1 Accessories