9-18
9.7 Maintenance menu screen
The screen is used to select and register maintenance mode.
Press [F･3] or [F･4] SW to changeover screen and press [F･1] or [F･2] SW to select desired
mode.
Press [F･5] SW to display rinse or dialysis screen. During alarm is actuated, the alarm
screen is displayed.
［ＭＡＩＮＴＥ ＭＥＮＵ（１／５）］
ＭＯＤＥ１：ＤＡＴＡ
ＭＯＤＥ２：ＡＬＡＲＭ ＳＥＴＴＩＮＧ
ＭＯＤＥ１ ＭＯＤＥ２ Ｐ．ＵＰ Ｐ．ＤＯＷＮ ＤＩＳＰ．
Fig. 9-22 Maintenance mode menu screen
To Next Page
Loading...
