9-14
9.4.2 Priming
Priming screen is used to set auto priming conditions and to indicate each step during
priming operation.
Press [F･1] or [F･2] SW to change target priming volume. Press [F･4] SW to release from
priming mode.
Press [F･5] SW to display settingⅠscreen.
［ＰＲＩＭＩＮＧ］
ＳＯＬＵＴＩＯＮ ＶＯＬ．（ｌ）：５．００
ＡＣＣＵＭＵＬＡＴＥＤ ＶＯＬ．（ｌ）：５．００ ＲＡＴＩＯ（％）：１００
＋ － ＥＸＩＴ ＤＩＳＰ．
Fig. 9-18 Priming screen
INDICATION DESCRIPTION
SOLUTION VOL. Setting of target priming solution volume
ACCUMULATED VOL. Display of used priming solution volume
RATIO Display of priming progress by ratio
To Next Page
Loading...
