Nipro SURDIAL - Acid Rinse Port Unit; Heat Exchanger; Hot Chemical Disinfectant Rinse Control; Hot Rinse Assy

21-11
temperature
Ambient
humidity
+35 to +80％
No dew condensation
Storage/transpor
t
Temperature
Short term：-30～+80℃
Long term (≧3 months)：-30～+45℃
No
Storage/transpor
t
Humidity
+15 to +85％
No dew condensation
21.4.3. Heat exchanger
Supply water temperature can be reduced by setting heat exchanger unit to the machine.
21.4.4. Acid rinse port unit
Acetic acid rinsing is enabled by setting acid rinse port to the machine.
21.4.5. Hot rinse Assy
Change from normal parts inside machine to hot rinse parts.
Hot rinse parts need to execute hot water rinse, hot chemical disinfectant rinse at 50℃.
 ＣＡＵＴＩＯＮ
● Do not use disinfectant concentrate which is not suitable of using by heat. (For example,
acetic acid)
21.4.5.1. Hot chemical disinfectant rinse control
Specifications Condition
Disinfection system Fluid chemical disinfection
system
No
Disinfectant preparation
control system
Fixed volume mixing by VCS
( Viscous Control System)
No
Temperature setting
38－42℃⇔43－47℃⇔48－52℃
Supply water temperature
which is required to rise at
50℃
With heat exchanger
Water temperature : ＞4℃
Without heat exchanger
Water temperature : ＞26℃
Rising time to setting
Temperature is approx.