9-9
9.3.2.4 RINSE4: AUTO2 C&D
Press [F･3] or [F･4] SW to shift blink to desired position and press [F･1] or [F･2] SW to
change setting.
Rinse program and time can be changed.
［ＲＩＮＳＥ４］ ２０：１５ ＜ Ｗａｉｔ ＞
ＷＴＲ３０→ＣＨＭ３０→ＤＷＬ３０→ＰＲＥ３０→－－－－－→－－－－－
ＰＲＥＲＩＮＳＥ ＳＴＡＲＴ ＴＯＭＯＲＲＯＷ １０：００
＋ － ＜ ＞ ＭＥＮＵ
Fig. 9-8 Rinse wait screen when RINSE4 is selected
INDICATION DESCRIPTION
WTR※※ Execution of water rinse for ※※ min
CHM※※ Execution of disinfection/rinse for ※※ min
ACD※※ Execution of acid rinse for ※※ min
DWL※※ Execution of dwelling for ※※ min
PRE※※
Start of prerinse at time set by PRERINSE START
－－－－－
No operation
PRERINSE START Setting of prerinse start time within period from this
time to 6 days after it
ＮＯＴＥ
z If acid rinse port unit (option) is not set to the machine, simultaneous setting of both
disinfection/rinse and acid rinse is disabled.
z If program adversely affecting the machine operation; for example, program to execute
disinfection/rinse and acid rinse in sequence; or that including no prerinse or no water
rinse step after rinse completion is set, rinsing operation can not be started even by
pressing RINSE SW.
z Refer to the option manual for setting hot rinse function. Set up hot water rinse (HWR)
and hot chemical disinfectant rinse require the machine already have hot rinse option.
To Next Page
Loading...
