3-2
4.
Cautions during operation
(1) Monitor always whether the machine and patient are maintained normally.
(2) If trouble of the machine or patient is detected, take appropriate actions such as
the machine stop so that the patient is kept safe.
(3) Take care that there is no direct contact of the machine to patient.
5. Cautions after operation
(1) Turn off power after returning operation SW’s, dials and the like to original
positions based on prescribed procedures.
(2) DO NOT forcibly pull any cord and the like to disconnect..
(3) Take care the followings to store or transport the machine:
1) Store the machine at place without fear of contact with water.
2) Store the machine at place without fear of adverse effects caused by
abnormal atmospheric pressure, temperature and/or humidity; insufficient
ventilation, direct exposure to sunlight; and dust, salt and/or sulfur
containing air.
3) Handle the machine under avoiding slant placement, vibration and shock
during storage and transportation.
4) DO NOT store the machine at chemical storing or gas generating place.
(4) Clean accessories, cords, and the like in order and clean them to store.
(5) Store the machine after cleaning it for the next use without any trouble.
6.
If the machine is damaged, indicate the damaged conditions to request
repair by specialist.
7.
DO NOT remodel or modify the machine.
8.
Check and maintenance
(1) Perform regular check and maintenance of the machine and its components.
(2) When the machine is used after storage for some time, check and maintain so that
it can be operated normally and safely.
9.
Read and understand other CAUTIONS contained in the operation manual.
To Next Page
Loading...
