HOTSPOT GATEWAY
System Administration 91
Enabling Intelligent Address Translation (iNAT)
Our patent-pending iNAT™ feature contains an advanced, real-time translation
engine that analyzes all data packets being communicated between the private and
public address domains. The Nomadix iNAT engine performs a defined mode of
network address translation based on packet type and protocol (for example, GRE,
IKE etc…).
1. From the Web Management Interface, click on Configuration, then iNAT.
The iNAT screen appears:
2. Enable of disable the iNAT feature, as required.
3. If you enabled iNAT, you have the option of enabling or disabling the following
VPN protocols:
z PPTP
z IPSEC
4. Click on the Submit button to save your options.
Use the
iNAT Start and iNAT End fields to enter an IP address or range of IP
addresses (up to 50), then click on the
Add button to add the IP address(es), or
click on the
Remove button to delete the IP address(es) from the database.
To Next Page
Loading...
