Nomadix HotSpot - XML Interface; HSG to External Server; XML for the External Server

HOTSPOT GATEWAY
Quick Reference Guide 301
XML Interface
XML for the External Server
The HSG sends a string of XML commands according to specifications. HTTP
headers are added to the XML packets that are built, as the billing “mirroring”
information is sent to the external server in HTTP compliant XML format.
Content-
length has also been added to the HTTP post.
The XML string built from the billing mirror record is in the following format:
HSG to External Server:
<USG RMTLOG_COMMAND="ADD_REC">
<REC_NUM>max 4 characters </REC_NUM>
<USG_ID>max 6 characters </USG_ID>
<PROPERTY_ID>max 64 characters</PROPERTY_ID>
<DATE>max 10 characters </DATE>
<TIME>max 8 characters</TIME>
<ROOM_NUM>max 20 characters</ROOM_NUM>
<AMOUNT>max 10 characters</AMOUNT>
<TRANS_TYPE>max 5 characters </TRANS_TYPE>
</USG>
Format for each field:
REC_NUM:00923 (numbers only, no alpha characters)
HSG_ID:00020b
PROPERTY_ID:Any regular string
DATE:03/30/2001 (mm/dd/yyyy)
TIME:23:41:38 (24 hour format)
ROOM_NUM:Any regular string
AMOUNT:234.34
TRANS_TYPE:PMS or CC
RESULT_VALUE:OK or ERROR
IP:Standard IP address format (123.123.123.123)