HOTSPOT GATEWAY
System Administration 207
Defining Subscriber UI Buttons {Subscriber Buttons}
This procedure allows you to define how each of the control buttons are displayed to
subscribers.
1. From the Web Management Interface, click on Subscriber Interface, then
Subscriber Buttons. The Subscriber Page -- Control Button Definitions screen
appears:
2. Enter the definitions you want for each control button in the corresponding
fields.
3. Click on the Submit button to save your changes, or click on the Reset button if
you want to reset all the values to their previous state.
If you want to reset all field values to their default state, click on the
Revert
button.
Only the Login button should be named “Login.” Do not assign this
name to any other button.
See
Caution
To Next Page
Loading...
