HOTSPOT GATEWAY
System Administration 161
Finding Port-Location Assignments by Port {Find by Port}
This procedure shows you how to find a port-location assignment, based on its
location. This procedure is useful if you want to review the details of a specific port-
location. You can also find port-locations based on their description or location.
1. From the Web Management Interface, click on Port-Location, then Find by
Port.
The Find a Port-Location Assignment by Port screen appears:
2. In the Enter Port field, enter the port you want to find.
3. Click on the Show button to view the Process Port-Location Assignments
screen, or click on the
Reset button if you want to reset the “port” value to its
blank state.
From this screen you can add, update or delete port-location assignments.
The “port” is the VLAN ID (when using 802.1Q 2-way).
To Next Page
Loading...
