Nomadix HotSpot - System Menu Items

HOTSPOT GATEWAY
264 Quick Reference Guide
System Menu Items
Items Description
ARP Add Adds an Address Resolution Protocol (ARP) table entry.
ARP Delete Deletes an ARP table entry.
Bridge Mode Enables the Bridge Mode option.
Dynamic Proxy Enables Dynamic Proxy.
Export Exports the system’s configuration settings to an archive
file.
Factory Imports the factory default settings.
FailOver Sets up a “sibling” Nomadix Gateway, allowing one
device to take up the users should the other device
become disconnected from the network.
History Displays a history log of the system’s activity, including
Access, Reboot and Uptime.
ICMP Sets up ICMP blocking for traffic from “pending” or “non
authenticated” users that are destined to addresses other
than those defined in the pass-through (walled garden)
list.
Import Imports previously exported system configuration settings
from an archive file.
Login Sets up the login name and password.
Mac Filtering Blocks malicious users based on their MAC address. Up
to 50 MAC addresses can be blocked at any one time.
Memory Utilization Displays system memory usage information.
Reboot Reboots the HSG.
Route Add Adds a route into the HSG’s routing table.
Route Delete Deletes a route to a specific IP destination.
Session Limit Limits the number sessions any one user can take over a
given time period and, if necessary, then blocks malicious
users.