HOTSPOT GATEWAY
56 Installing the HSG
Archiving Your Configuration Settings
Once you have installed your HSG and established the configuration settings, you
should write the settings to an archive file. If you ever experience problems with the
system, your archived settings can be restored at any time.
Refer to the following procedures:
z “Exporting Configuration Settings to the Archive File {Export}” on
page 219.
z “Importing Configuration Settings from the Archive File {Import}” on
page 226.
Installing the Nomadix Private MIB
The Nomadix Private MIB is supplied on the “Accessories” CD-ROM, delivered with
your HSG. After importing the nomadix.mib file from the CD-ROM you will be able
to view and manage SNMP objects on your HSG.
1. Import the nomadix.mib file into your SNMP client manager.
2. Connect to the HSG from a node on the network that is accessible via the HSG’s
network port (Internet, LAN, etc.). Be sure to enable the SNMP daemon on the
HSG (available on the HSG’s CLI or Web Management Interface, under the
Configuration menu –
snmp).
3. All variables defined by Nomadix start with the following prefix:
iso.org.dod.internet.private.enterprises.nomadix
4. You should now be able to define queries and set the SNMP values on your HSG.
If necessary, consult this User’s Guide or your SNMP client manager’s
documentation for further details.
We recommend that you change the predefined community strings in
order to maintain a secure environment for your HSG.
To Next Page
Loading...
