HOTSPOT GATEWAY
154 System Administration
Deleting Port-Location Assignments by Location {Delete by Location}
This procedure shows you how to delete a port-location assignment, based on its
location. The HSG prompts you to confirm this action before deleting the requested
port-location.
1. From the Web Management Interface, click on Port-Location, then Delete by
Location.
The Delete Port-Location Assignments by Location screen appears:
2. In the Location field, enter the location of the port-location assignment you want
to delete.
3. Click on the Delete button to delete the specified port-location assignment, or
click on the
Reset button if you want to reset the “location” value to its blank
state.
If you are unsure which port-locations are currently mapped to the
system, you can view a list at “Displaying the Port-Location Mappings
{List}” on page 165.
Locations are case-sensitive.
To Next Page
Loading...
