HOTSPOT GATEWAY
206 System Administration
2. Click on the Enable IWS Goodbye Page check box to enable (or disable) the
IWS Goodbye Page, as required.
3. If you enabled the IWS Goodbye Page, select your preferred display options by
checking the corresponding boxes:
z Display IP Address
z Display Authen Type
z Display Start Time
z Display Stop Time
z Display Byte Sent
z Display Byte Received
z Display Hypertext Link URL
4. If you enabled the Hypertext Link URL feature, enter the URL for the link in the
Hyper Text Link URL field.
5. Define the following Field Label Definitions for your Goodbye Page:
z Session Summary
z IP Address
z Authen Type
z Start Time
z Stop Time
z Byte Sent
z Byte Received
z Go To
6. Click on the Submit button to save your changes. Alternatively, you can click on
the
Reset button to reset all values to their previous state, or click on the Revert
button to revert all values to their default state.
If you enabled the Partner image for the Login UI, you will also see the
same image in the IWS Post Session page.
To Next Page
Loading...
