HOTSPOT GATEWAY
System Administration 131
The Add Public Subnets screen appears:
3. Enter a valid IP address for this subnet in the Subnet field.
4. Enter the subnet mask for this subnet in the Subnet Mask field.
5. Click on the Back to Main Subnet Configuration Page link to return to the
previous screen (Public Subnets Settings).
To edit the “Current Public DHCP Subnets” table, go to “Managing the
DHCP Service Options {DHCP}” on page 80.
For additional information about the multiple subnet feature, go to
“Contact Information” on page 312 for Nomadix Technical Support.
To Next Page
Loading...
