HOTSPOT GATEWAY
190 System Administration
2. If you want subscribers to see the ICC (pop-up window), click on the check box
for
Display ICC (Information and Control Console) to enable this feature.
3. Choose which ICC you want to be displayed (either the featured ICC or the
simple Logout Console):
Enable one of the following:
z ICC (Information and Control Console)
z Nomadix Logout Console
4. If you enabled either of the ICC pop-up options, you can choose a unique name
for the console. Simply type a meaningful name in the
Title field.
5. Define the physical location where you want the Nomadix Logout Console to
appear on the subscriber’s screen.
Choose one of the following options:
z Upper Left Corner
z Upper Right Corner
z Lower Left Corner
z Lower Right Corner
6. Define how you want to display the subscriber session time:
z Elapsed Time (how much time has elapsed since the start of the session)
z Time Remaining (how much time is remaining for the session)
7. You must now decide what you want the ICC to do if the subscriber closes it.
Choose one of the following options:
z Redisplay itself
z Logout (return the subscriber to a “pending” state) – valid only with
RADIUS.
You must now assign the buttons that you want to display to subscribers.
To Next Page
