HOTSPOT GATEWAY
System Administration 193
12. Define the parameters for your banner(s):
z Name/Text
z Target URL
z Image Name (see following note)
z Duration (secs)
z Start Time (Optional)
z Stop Time (Optional)
13. If you changed any of the Image Name definitions, click on the check box for
Reboot after changes are saved? (to reboot the HSG).
14. When finished, click on the Submit button to save your changes, or click on the
Reset button if you want to reset all the values to their previous state.
15. To return to the previous screen, click on the Configure ICC link.
If you assign (or change) button images or banner images, the HSG
must be rebooted for your changes to take effect.
To Next Page
Loading...
