HOTSPOT GATEWAY
316 Appendix B: Addendum
PPPoE Service Name
This is the Service-Name TAG. The maximum allowed length is 31 characters.
PPP Keep Alive
Echo Request Interval in seconds
Setting this to 0 will disable echo requests from the NSE. The default value for
this parameter is 30 seconds.
Maximum Missed Responses allowed
This is the number of echo-requests that can be allowed to go without a response
before the NSE determines that the PPP link is down. This parameter can only set
to whole number above 0.
PPP Authentication
Username
This is the username for PPP based authentication required by your service pro-
vider.
Password
This is the password for PPP based authentication required by your service pro-
vider. Max length for both username and password is 128 characters
IP Configuration Mode
This defines the IP address configuration mode for the NSE. Setting this to Dynamic
will obtain a dynamic IP address from PPPoE server similar to DHCP client. Setting
this to static will require manually configuring IP address in the text box.
Maximum TCP MSS
Please note that this is the MSS not MTU. The maximum value suggested by the RFC
is 1452.
To Next Page
Loading...
