HOTSPOT GATEWAY
Installing the HSG 41
z Assigning the Location Information and IP Addresses:
z Assigning the Network Interface IP Address – This is the
public IP address that allows administrators and subscribers to see the
HSG on the network. Use this address when you need to make a
network connection with the HSG.
z Assigning the Subscriber Interface IP Address – This is the
IP address that subscribers will see on the private side of the HSG.
z Assigning the Subnet Mask – The subnet mask defines the
number of IP addresses that are available on the routed subnet where
the HSG is located.
z Assigning the Default Gateway IP Address – This is the IP
address of the router that the HSG uses to transmit data to the
Internet.
To Next Page
Loading...
