HOTSPOT GATEWAY
64 System Administration
7. If AAA passthrough is enabled, enter the corresponding port number.
8. Enable or disable the 802.1x Authentication Support feature, as required.
9. Enable or disable the Origin Server (OS) parameter encoding for Portal Page
and EWS
feature, as required.
10. You can choose to Enable failover to Internal Web Server
Authentication if Portal Page/External Web Server is not reachable by
placing a check in that box.
11. Enable or disable Port Based Billing Policies.
The Port Location capabilities on the NSE have been enhanced. It is now possible
to define a policy on a port. The billing methods (RADIUS, Credit Card, L2TP
Tunneling) and the billing plans available on each port can now be individually
configured. This ability allows for having different billing methods and billing
plans on different ports of the NSE. .
In order for the port-based policies to work, you must enable Port Based Billing
Policies. See also “Adding and Updating Port-Location Assignments {Add}” on
page 150.
The port number must be different than 80, 2111, 1111, or 1112.
Both AAA and RADIUS Authentication must be enabled for 802.1x
Authentication support.
To Next Page
Loading...
