HOTSPOT GATEWAY
System Administration 79
2. If you want to enable the billing records “mirroring” functionality for credit card
transactions (and you have purchased the appropriate product license), click on
the check box for
Enable/Disable Mirroring.
3. Enter the property identification code in the Property ID field.
4. Enter the communication parameters for the primary server that is to be used for
mirroring, including:
z Primary IP
z URL
z Secret Key
5. Repeat Step 4 for the secondary server (if any) and all carbon copy servers.
6. Define the “fail-safe” provisions, including:
z Retransmit Method – Alternate, or do not alternate.
z Number of Retransmit Attempts – This tells the system how many times it
should attempt to retransmit billing records before suspending the task.
z Retransmit Delay – This specifies the time delay between each
retransmission.
7. Click on the Submit button to save your changes, or click on the Reset button if
you want to reset all the values to their previous state.
The HSG and the “mirror” servers must use the same secret key.
To Next Page
Loading...
