OcÃ© MP1020 - User Manual

Questions and Answers

J
Justin GrahamAug 22, 2025
What to do if OcÃ© MP1020 stapling cannot be performed?
- S
  saracurryAug 22, 2025
  If stapling cannot be performed with your OcÃ© Printer Accessories, it might be due to the following: * The number of pages exceeds the stapling limit. Print by specifying the number of pages per set for the number of pages that can be stapled, which is up to 50 pages of Letter size or smaller plain paper. * The document contains pages of different sizes. Check the document to ensure all pages are the same size.
L
lowensNov 10, 2025
How to fix OcÃ© Printer Accessories when unable to print?
- E
  Emily MeadowsNov 10, 2025
  If your OcÃ© Printer Accessories is unable to print, there could be several reasons: * The selected printer driver may not be compatible with the printer controller. Ensure the correct printer name is selected. * Cables might be disconnected. Verify that the network, parallel, or USB cable is properly connected. * An error might have occurred. Check the control panel of the machine. * A print job may be queued, delaying printing. Review the job order on the Active Jobs list on the machine's control panel. * 'Save in User Box' or 'Secure Print' might have been selected. Check the Box screen or Secure Print screen on the machine's control panel. * Incorrect account or user credentials may have been entered if account track or authentication settings are applied. Enter the correc...
H
hlopezDec 1, 2025
Why am I unable to specify desired settings on OcÃ© MP1020 Printer Accessories?
- J
  John SimpsonDec 1, 2025
  If you're unable to specify desired settings or print as specified with your OcÃ© Printer Accessories, consider the following: * Some functions cannot be combined. Do not try to select settings that are not available. * An incorrect combination of functions has been specified. Check the settings and specify the functions correctly. * Incorrect settings are specified. Check each setting in the printer driver. * Application settings may override printer driver settings. Enter the correct settings in the application. * The watermark is not correctly set. Check the watermark settings. * The watermark density is set to a level that is too low. Check the density settings. * Stapling is not possible if “Paper Type” is set to “Thick” or “Transparency”. Check each setting in the prin...

OcÃ© MP1020 Specifications

General

Brand	OcÃ©
Model	MP1020
Category	Printer Accessories
Language	English

OcÃ© MP1020 - User Manual

Table of Contents

Questions and Answers

OcÃ© MP1020 Specifications