Océ MP1020 - Specifying User Authentication Settings

7
Setting up the PostScript driver (Windows)
7-14 MP1020/1025/1035
Specifying user authentication settings
When the authentication settings have been applied on this machine, a user
name and password must be entered.
1 Click the Setup tab.
2 Click the [User Authentication/Account Track] button.
3 Select the “User Authentication” check box, and then enter the user
name and password.
2
Note
If a print job is sent using a user name or password that is not a registered
account on this machine or if a job is sent without the “User Authentica-
tion” check box selected, this machine cannot authenticate the operation
and cannot print. When this occurs, the sent job is deleted.
!
Detail
For user authentication settings, consult the administrator of this ma-
chine.