Océ MP1020 - For Print Server Mode with Netware 4.X Bindery Emulation

4
Setting up network printing
4-28 MP1020/1025/1035
For Print Server mode with NetWare 4.x bindery emulation
Before using bindery emulation, check that bindery emulation is compatible
with the NetWare server.
1 From a client computer, log on with Supervisor permissions to access
the NetWare server where the Pserver is registered.
2 Start up Pconsole.
3 From the “Available Options” list, select “Quick Setup”, and then click
the [Enter] button.
4 Enter the appropriate names in the “Printer Server Name”, “Printer
Name”, “Print Queue Name”, and “Print Queue Volume” fields, select
“Other/Unknown” from the “Printer type” field, and then save the spec-
ified settings.
5 Click the [Esc] button to quit Pconsole.
6 In Administrator mode of Web Connection, select “Common Setting”,
then “NetWare” from the Network tab, and then specify the following
settings.