Océ MP1020 - Font - CR;LF Mapping

Various settings
11
MP1020/1025/1035 11-21
Font - CR/LF Mapping
You can specify the control code substitution method when printing test da-
ta. (Default setting: OFF)
% On the Font screen, touch [CR/LF Mapping] to display the setting
screen. After changing the setting, touch [Enter].
– OFF: Does not perform substitution.
– Mode1: Substitutes CR for CR-LF.
– Mode2: Substitutes LF for CR-LF. Substitutes FF for CR-FF.
– Mode3: Substitutes CR and LF for CR-LF.
Substitutes FF for CR-FF.