Setting up the PostScript driver (Windows)
7
MP1020/1025/1035 7-19
Center binding
You can fold and staple printouts in half.
When optional finisher and saddle stitcher are installed and Booklet is spec-
ified, you can specify “Center Staple and Fold”.
1 Click the Layout tab.
2 From the “Center Staple and Fold” drop-down list, select “Center Sta-
ple and Fold”.
Hole punching
Holes can be punched into the printed document.
The hole punch function is available only when punch unit is installed on op-
tional finisher.
1 Click the Layout tab.
2 From the “Hole-Punch” drop-down list, specify the number of punched
holes.
2
Note
Depending on the selected Binding Position setting, different hole punch-
ing positions are available.
To Next Page
Loading...