Océ MP1020 - Specifying the Watermark Tab Settings; Printing a Watermark

Setting up the PostScript driver (Windows)
7
MP1020/1025/1035 7-21
7.5 Specifying the Watermark tab settings
Printing a watermark
You can print specific text in the background as a watermark.
1 Click the Watermark tab.
2 From the drop-down list, select the watermark that you want to print.
3 Specify settings for the following:
– Transparent: Prints the watermark with a transparent background.
– 1st Page Only: Prints the watermark on the first page only.
– Repeat: Prints several watermarks on a single page.