3
Installing the printer driver
3-4 MP1020/1025/1035
3.2 When used with Windows
The installation procedure for the Windows printer driver differs depending
on how this machine is connected to the computer and depending on which
printer driver is used. The installation method also differs depending on the
version of Windows that you are using. Refer to the table below for the ap-
propriate procedure for installing the printer driver on your computer.
2
Note
For details on installing the printer driver in a network environment, refer
to “Setting up network printing” on page 4-3. Because it is necessary to
specify other network settings in advance when installing the printer driv-
er using a network connection, install it using a local connection at this
time.
To install the printer driver under Windows XP, Windows Server 2003,
Windows 2000, or Windows NT 4.0, log on using a user name that is au-
thorized by the administrator.
The printer driver can be installed using the Add Printer Wizard, however,
if used, the Plug and Play screen will appear each time the computer is
started.
To connect this machine to a computer using a parallel connection, the
optional local interface kit is required.
Printer driver Connection
method
Refer to
PCL All connection
methods
“Installing the printer driver using the Add Printer
Wizard” on page 3-9
PostScript
PCL
Network connec-
tion
“Installing the printer driver using the Add Printer
Wizard” on page 3-9
“For Windows 98 SE/Me/2000/NT 4.0” on
page 3-12
“For Windows XP/Server 2003” on page 3-9
Parallel connection “Installing the printer driver using Plug and Play” on
page 3-5
“For Windows 98 SE” on page 3-5
“For Windows Me/2000” on page 3-6
“For Windows XP/Server 2003” on page 3-8
USB connection “Installing the printer driver using Plug and Play” on
page 3-5
“For Windows 98 SE” on page 3-5
“For Windows Me/2000” on page 3-6
“For Windows XP/Server 2003” on page 3-8
To Next Page
Loading...
Need help?
General