9
Setting up the PPD driver (Mac OS 9.2)
9-14 MP1020/1025/1035
Printer specific options (finishing options 1 to 3)
You can specify printer-specific options. You can specify these options
when using the staple or hole punch functions of this machine.
1 From the “File” menu, select “Print”.
2 Select “Finishing Options 1 to 3”.
3 Specify settings for the following:
– Offset: Specifies offset.
– Output Tray: Selects the output tray.
– Binding Position: Specifies the binding position.
– Duplex: Performs duplex printing.
– Combination: Specifies booklet printing.
– Staple: Performs stapling.
– Hole-Punch: Performs hole punching.
– Center Staple and Fold: Folds the printouts in half and staples.
– Front Cover Page: Attaches a front cover page.
– Back Cover Page: Attaches a back cover page.
– Paper Source: Selects the input tray for the front cover page and
back cover page.
– OHP Interleaving: Inserts interleaves between overhead projector
transparencies.
– OHP Interleaving Tray: Selects the input tray for the transparency
interleaves.
– Stop: Stops printing temporarily after part of the document has
been printed so that the proof print can be checked.
– Resolution: Specifies the resolution.
To Next Page
Loading...
Need help?
General