Setting up the PPD driver (Mac OS 9.2)
9
MP1020/1025/1035 9-15
2
Note
When optional finisher and saddle stitcher are installed and Booklet is
specified, you can specify “Center Staple and Fold” to fold and bind the
printout in half.
The staple function is available only when optional finisher is installed.
The hole punch function is available only when punch unit is installed on
optional finisher.
You cannot specify settings in “Back Cover Page” only. Specify settings
in “Back Cover Page” and “Front Cover Page” at the same time.
To Next Page
Loading...