3
Installing the printer driver
3-20 MP1020/1025/1035
For Mac OS 9.2
After connecting this machine, it can be used as a printer by selecting “Post-
Script printer” under “Chooser” and by specifying the printer description
(PPD) File.
First, copy the printer description (PPD) file onto the Macintosh computer.
1 Insert the Macintosh printer driver CD-ROM into the Macintosh com-
puter’s CD-ROM drive.
2 Open the “OS 9_x” folder from “Driver”, which is located in a language
folder on the CD-ROM.
3 Select the PPD file “Generic35BW-1”, and then copy it into the “Printer
Descriptions” folder in “System Folder”−“Extensions” of “Hard Disk”.
– Next, select a printer.
The printer driver can use a standard Macintosh LaserWriter.
4 On the Apple menu, click “Chooser”.
5 Make sure that “AppleTalk” is set to “Active”, and then click the [Laser-
Writer] icon.
6 From the “Select a PostScript Printer” list, click the applicable printer
for the printing system, and then click the [Create] button.
– You can check the printer name from AppleTalk Configuration in
Web Connection.
For details, refer to “Printing with Macintosh” on page 4-36.
– If a different PPD file has already been selected, click the [Setup]
button in step 6, and then click the [Select PPD] button from the
screen that is already displayed.
The PostScript printer description (PPD) file selection screen appears.
To Next Page
Loading...
Need help?
General