Various settings
11
MP1020/1025/1035 11-13
Basic Setting - Sets
You can specify the number of copies to print when no setting has been
specified. (Default setting: 1 Set)
% On the Basic Setting screen, touch [# of Sets] to display the setting
screen. After using the keypad to type in a value, touch [Enter].
!
Detail
For the PPD driver, the settings specified on this machine have prece-
dence if multiple copies are specified in “Default Set - Basic Setting - #
of Sets” of this machine.
2
Note
A value outside the allowable range cannot be specified. Type in a value
within the allowable range.
To cancel changes to the settings, touch [Cancel].
To Next Page
Loading...
Need help?
General