3
Installing the printer driver
3-6 MP1020/1025/1035
For Windows Me/2000
1 After using a parallel cable or a USB cable to connect this machine to
a computer, turn the main power of this machine on.
– Do not disconnect or connect the cable while the computer is start-
ing up.
2 Start the computer.
The Add New Hardware Wizard starts up.
3 Insert the Windows printer driver CD-ROM into the computer’s CD-
ROM drive.
– PCL driver: User Software CD-ROM
– PostScript driver: PostScript Printer Driver CD-ROM
4 Select “Search for a suitable driver for my device (recommended)” (for
Windows Me, select “Automatic search for a better driver (Recom-
mended)”), and then click the [Next] button.
5 For Windows 2000, select “Specify a location”, and then click the
[Next] button.
For Windows Me, select “Specify a Location”, and then click the
[Browse] button.
6 Specify the folder on the CD-ROM that contains the printer driver for
the operating system that you are using, and then click the [OK] button.
Printer drivers that can be selected:
– For Windows Me
PCL driver: User Software CD-ROM “Driver\Drivers\” folder
PostScript PPD driver: PostScript Printer Driver CD-ROM “Driv-
er\PS-PPD” folder
– For Windows 2000
PCL driver: User Software CD-ROM “Driver\Drivers\” folder
PostScript driver: PostScript Printer Driver CD-ROM “Driver\Driv-
ers\ ” folder
7 Click the [OK] button (for Windows Me, click the [Next] button), and
then follow the on-screen instructions.
8 Click the [Finish] button.
9 When installation is complete, make sure that the icon of the installed
printer appears in the Printers window.
10 Remove the CD-ROM from the CD-ROM drive.
To Next Page
Loading...
Need help?
General