11
Various settings
11-36 MP1020/1025/1035
Specifying the input tray or default paper setting, CR/LF substitution
method, and printing of jobs without authentication (mode 452)
Specify whether the input tray is set, or selected according to the default pa-
per setting. In addition, specify the CR/LF substitution method and whether
or not to print jobs without authentication when account track settings have
been applied.
Settings at time of purchase
Specifying the setting
The grayed out cells are the settings at the time of purchase. The reference
pages for each function are shown in the far right column.
Bits 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bits Description Setting Description Refer to
7 ---------------------
0 *Do not change this bit. ----------
6 Specifies whether the
input tray is set, or se-
lected according to
the default paper set-
ting.
0 Tray with default paper is
selected.
----------
1 Input tray is set.
5, 4 Specifies the CR/LF
substitution method.
00 CR=CR, LF=LF, FF=FF p. 11-21
01 CRÆCRLF, LF=LF, FF=FF
10 CR=CR, LFÆCRLF,
FFÆCRFF
11 CRÆCRLF, LFÆCRLF,
FFÆCRLF
3, 2, 1 ---------------------
000 *Do not change these bits. ----------
0 Specifies whether or
not to prohibit a print
job without authenti-
cation.
0 Prohibited p. 11-95
1 Not prohibited
To Next Page
Loading...
Need help?
General