Setting up the PCL driver
6
MP1020/1025/1035 6-25
7 Specify the storage location for the form data, and then enter the file
name in the “File name” box.
8 Click the [Save] button.
9 Select the file name, and then click the [OK] button.
The Print dialog box appears again.
10 Click the [OK] button.
Instead of executing a print job, the form data is saved. The file exten-
sion is “.kmf”.
2
Note
From the Overlay tab, the selected form data can be deleted by clicking
the [Delete Overlay File] button.
To Next Page
Loading...
Need help?
General