11
Various settings
11-78 MP1020/1025/1035
2
Reminder
To apply any changes to settings for “DHCP Configuration”, “IP Ad-
dress”, “Subnet Mask”, “Gateway Address”, or “Self-Domain Name”, re-
start this machine (turn the main power off, then on again).
When turning the machine off, then on again, wait about 10 seconds after
turning the machine off before turning the machine on again. The settings
may not be applied correctly if the machine is turned on immediately after
it is turned off.
2
Note
“Self-Domain Name” can only be displayed when the optional fax kit is
installed.
Gateway Address Specify the default gateway address connecting to a network (for-
mat: “***.***.***.***”, input range for ***: 0-255 Note that the following
values cannot be entered in the most significant byte: 0, 127, 224-
255).
RAW Port Number Specify the RAW port number (input range: 1-65535).
Self-Domain Name Specify the domain name for this machine. (up to 64 alphanumeric
characters and symbols (! # $ % & ’ * + - . / = ? _ ` { | } ~))
DNS Configuration Specify whether to use the DNS server.
Host Name Input the host name connecting to a network. (up to 64 alphanumeric
characters and symbols (-))
Domain Name Specify the domain name for this machine (up to 64 alphanumeric
characters and symbols (! # $ % & ’ * + - . / = ? _ ` { | } ~ @)).
DNS Server Address Register a maximum of three DNS servers (format: “***.***.***.***”, in-
put range for ***: 0-255 Note that the following values cannot be en-
tered in the most significant byte: 0, 127, 224-255).
DNS Query Timeout Specify the time for an inquiry timeout to the DNS server.
Item Description
To Next Page
Loading...
Need help?
General