Various settings
11
MP1020/1025/1035 11-81
2
Reminder
To apply any changes to settings for “Enable NetWare”, “Frame Type”,
“Print Queue Scan Rate”, “Mode”, or “Printer Number”, restart this ma-
chine (turn the main power off, then on again).
When turning the machine off, then on again, wait about 10 seconds after
turning the machine off before turning the machine on again. The settings
may not be applied correctly if the machine is turned on immediately after
it is turned off.
Preferred NDS Context Enter the preferred NDS context name (up to 191 alphanumeric
characters, excluding / ¥ : ; , * [ ] < > | + = ?).
Preferred NDS Tree Enter the preferred NDS tree name (up to 63 alphanumeric charac-
ters, excluding / ¥ : ; , * [ ] < > | + = ?).
Print Queue Scan Rate Enter the print queue scan rate (input range: 1-65535 seconds).
Mode Select “PServer” or “NPrinter/RPrinter” as the operation mode of the
print server.
Printer Number Enter the Nprinter/Rprinter printer number (input range: 0-255, 255
is automatically given).
Item Description
To Next Page
Loading...
Need help?
General