Oki IP-6620 - Page 172

172
Advanced operations
12
>>MEDIA ADV VALUE
2
*102.00
g
102.00%
Press the CANCEL button to exit the MEDIA
ADV VALUE menu.
13
>EDIT MEDIA PRESETS
2
MEDIA ADV VALUE
Press the ONLINE button.
PRINTER READY
01: PAPER / 1626mm
Preset media default values
Up to 20 presets (No. 01 to 20) of media can be registered. Media presets can also be deleted or changed. However,
preset No. 01 (PAPER) and the media initially set in the printer cannot be deleted.
For the media preset 01 to 05, the initial values are listed below.
Preset No.
01 02 03 04 05 06
Setting
EDIT PRESET NAME Paper Glossy Matte Banner BLT_B LWT_B
MEDIA ADV PRIORITY DATA SET TING DATA SETTING DATA SETTING DATA SETTING DATA SETTING DATA SETTING
MEDIA ADV VALUE 100.00% 100.00% 100.00% 100.00% 100.00% 100.00%
BIDIR ADJUST 1 00 00 00 00 00 00
BIDIR ADJUST 2 00 00 00 00 00 00
BIDIR ADJUST 3 00 00 00 00 00 00
BIDIR ADJUST 4 00 00 00 00 00 00
HEATER PRIORITY DATA SETTING DATA SET TING DATA SET TING DATA SETTING DATA SETTING DATA SETTING
AFTERHEATER T ** ºC 50ºC 50ºC 50ºC 50ºC 50ºC
PRINTHEATER T ** ºC 40ºC 40ºC 40ºC 40ºC 40ºC
PREHEATER T ** ºC 45ºC 45ºC 45ºC 45ºC 45ºC
MISC SETTINGS
REMAINING MEDIA 0m 0m 0m 0m 0m 0m
IONIZER OFF OFF OFF OFF OFF OFF
TUR MODE LOOSE LOOSE LOOSE TENSION TENSION TENSION
MEDIA EDGE GUARDS ON ON ON ON ON ON
SKEW CHECK ON ON ON ON ON ON
COLOR STRIPE OFF OFF OFF OFF OFF OFF
SUCTION FAN POWER MEDIUM MEDIUM MEDIUM LOW LOW LOW
MEDIA ADVANCE MODE FORWARD ONLY FORWARD ONLY FORWARD ONLY FORWARD ONLY FORWARD ONLY
BACK & FWD MAX
MEDIA BACK MODE ON ON ON ON ON ON
AUTO PH CLEANING
BEFORE&AFTER PRINT BEFORE&AFTER PRINT BEFORE&AFTER PRINT BEFORE&AFTER PRINT BEFORE&AFTER PRINT BEFORE&AFTER PRINT
PH REST INTERVAL 0 CYCLES 0 CYCLES 0 CYCLES 0 CYCLES 0 CYCLES 0 CYCLES
PH REST TIME 1 SECONDS 1 SECONDS 1 SECONDS 1 SECONDS 1 SECONDS 1 SECONDS
CARRIAGE SPEED NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL
DETECT MEDIA WIDTH AUTO AUTO AUTO AUTO AUTO AUTO
DETECT MEDIA ON ON ON ON ON ON
REMAIN MEDIA MONIT OFF OFF OFF OFF OFF OFF
*Modify the media advance adjustment value and the bidirectional adjustment values to t the media you are using.