Oki IP-6620 - Adjustment methods

85
Adjustment
Adjustment methods
Adjusting media feeding: Media advance adjustment
The media feeding operation can be adjusted depending on media characteristics, such as thickness, rigidness, and
smoothness of the surface.
To maintain a high print quality, perform media advance adjustment and set the most suitable media advance
adjustment value.
What is the timing to perform media advance adjustment?

When one of the following changes has been made
- The media has been changed
- The print mode has been changed
- The position of the pressure roller lever has been changed
- The TUR unit usage setting or TUR mode (loose or tension) has been changed
- The media advance mode has been changed
- The suction fan setting (o, low, medium, high) has been changed

When the media advance adjustment value is incorrect.
When the media advance adjustment value is incorrect, banding (horizontal bands) appears periodically on the
printout.
Automatic print adjustment
See Cautions regarding automatic print adjustment ( page 83)
<Workow>
STEP1 STEP2
Completed
Select the print mode
Execute automatic print
adjustment
i
If the print quality has not been improved
Perform manual print adjustment ( page 87)
<Procedure>
1
Load the media.
Load the media in the same conditions as normal printing.
2
PRINTER READY
01: PAPER / 1626mm
Press the ADJUST button.
3
ADJUST
2
MEDIA ADVANCE
,
Press the Up and Down buttons to select
MEDIA ADVANCE.
Before printing Loading the media
Adjustment
Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix