Oki IP-6620 - Prevent the Media from Sticking and Wrinkling

176
Advanced operations
Prevent the media from sticking and wrinkling
Decrease the platen suction fan power
The vacuum pressure applied to the media in the printing zone helps to hold the media down on the platen to keep
the distance from media to print heads constant.
When the media sticks to the platen, set the vacuum pressure to LOW. The LOW vacuum pressure is also eective
when your media is very exible and wrinkles easily.
1
PRINTER READY
01: PAPER / 1626mm
Press the MENU button.
2
MENU
2
INFORMATION
Press the Down button to select EDIT MEDIA
PRESETS.
3
MENU
2
EDIT MEDIA PRESETS
Press the OK button.
4
>EDIT MEDIA PRESETS
2
SELECT PRESET NO.
Press the Down button to select MISC
SETTINGS.
5
>EDIT MEDIA PRESETS
2
MISC SETTINGS
Press the OK button.
6
>>MISC SETTINGS
2
REMAINING MEDIA
Press the Down button to select SUCTION
FAN POWER.
7
>>MISC SETTINGS
2
SUCTION FAN POWER
Press the OK button.
8
>>>SUCTION FAN POWER
2
MEDIUM
Press the Down button once.