Oki IP-6620 - Set the Print End Heating Time

215
Advanced operations
Set the print end heating time
Set the duration the heater maintains the set temperature after printing.
1
PRINTER READY
02:Glossy/1626mm
Press the MENU button.
2
MENU
2
INFORMATION
Press the Down button to select SETTING.
3
MENU
2
SETTING
Press the OK button.
4
>SETTING
2
MEDIA HEATER SET.
,
Press the Down button to select MEDIA
HEATER SET., and then press the OK button.
5
>>MEDIA HEATER SET.
2
PRINT END HEATING
,
Press the Down button to select PRINT END
HEATING, and then press the OK button.
6
>>>PRINT END HEATING
2
10
g
30 minutes
, , ,
Press the Right and Left buttons to select the
digit, and press the Up and Down buttons to
select a value for the print end heating time.
7
>>>PRINT END HEATING
2
30
g
30 minutes
Press the OK button.
8
>>>PRINT END HEATING
2
30 minutes
Before printing Loading the media Adjustment Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix