Oki IP-6620 - Remove some Media Wrinkles During Printing

200
Advanced operations
Remove some media wrinkles during printing
If the media wrinkles during printing (online mode), put the printer in pause mode to be able to release the grip.
CAUTION

Some wrinkles can be removed by releasing the the pressure roller (lifting the lever) but this may also decrease the print
quality as the media may slip.
1
PRINTING...
STANDARD ND UNI
Press the ONLINE button during the
preheating time before printing.
2
PRINTER IN PAUSE
01: PAPER / 1626mm
Lift the pressure roller lever.
After entering pause mode, lift the pressure
roller lever.
When lifting the lever, place your hand on the media
to prevent it from slipping.
3
LOWER THE LEVER
Lower the pressure roller lever.
Lower the pressure roller lever and the panel
returns to the pause mode display.
4
PRINTER IN PAUSE
01: PAPER / 1626mm
Press the ONLINE button to resume printing.
5
PRINTING...
STANDARD ND UNI