91
Adjustment
Correcting ink output position: Bidirectional adjustment
During bidirectional printing, a slight dierence may appear in the ink output position between the rst scanning
direction and the second scanning direction.
To maintain a high print quality, perform bidirectional adjustment and set the most suitable bidirectional
adjustment value.
What is the timing to perform bidirectional adjustment?
îšš
When one of the following changes has been made
- The media has been changed
- The print mode has been changed
- The carriage speed (normal, slow) has been changed
- The height of the print heads has been changed
îšš
When the bidirectional adjustment value is incorrect.
When the bidirectional adjustment value is incorrect, grains may appear on the printout or the printout may be
blurred.
Automatic print adjustment
See Cautions regarding automatic print adjustment ( page 83)
<Workow>
STEP1 STEP2
Completed
Select a bidirectional adjustment
pattern suitable for the print mode
Execute automatic print
adjustment
i
If the print quality has not
been improved
Perform manual print adjustment ( page 93)
<Procedure>
1
Load the media
Load the media in the same conditions as normal printing.
2
PRINTER READY
01: PAPER / 1626mm
Press the ADJUST button.
3
ADJUST
2
MEDIA ADVANCE
,
Press the Up and Down buttons to select
BIDIR POSITION.
4
ADJUST
2
BIDIR POSITION
Press the OK button.
Before printing Loading the media
Adjustment
Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix
To Next Page
Loading...
Need help?
General
