41
Before printing
To connect the USB cable
1
USB 2.0 cable (B-type connector)
USB connector
Connect the printer’s USB 2.0 cable to the
USB connector at the center of the printer
rear.
Important!
îšš
Use the supplied USB 2.0 cable.
îšš
For the USB connection and related systems, use
hubs and cables supporting USB 2.0. Note that
normal operation cannot be guaranteed if the
hubs, cables, and the other related devices are not
USB-compliant.
îšš
Use a cable of 5 m or shorter. If the connection
length exceeds 5 m, use hubs to extend the
connection. The hub quantity must be ve or less
in total. Note that normal operation cannot be
guaranteed if the cable exceeds 5 m, or if the cable
connection exceeds 5 m without hubs.
Before printing
Loading the media Adjustment Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix
To Next Page
Loading...
Need help?
General
