212
Advanced operations
The heater temperature control system for printing
Print
Delay
time
Standby time
Set temperature maintained Standby temperature
Temperature control stop
rintheater set temperature
Preheater set temperature
Afterheater set temperature
Standby set temperature
Ambient temperature
(Temperature)
The Printer receives the RIP data.
îšš
The heaters are in standby at the temperatures below.
Preheater: 35 ºC
Printheater: 35 ºC
Afterheater: 35 ºC
However, the heaters temperatures above are lowered to the set temperatures if the set temperatures are lower than
the standby temperatures.
Display the heater control menu
Press the HEATER button to display the heater control menu.
2nn
50 40 45°C
Aft 40 +40 45Pre
Heater operating
information
Afterheater
The + sign indicates that
the heater is heating.
Printheater Preheater
Set temperature
Set temperature
Heater operating information
- Force heating ON:
- Normal operation:
- Heater temporarily OFF:
Button operations in the heater control menu
and buttons Change the digit (select the target of the operations)
and buttons Change the heater temperature or the heater operation.
button Set the afterheater, printheater, or preheater on and off individually.
To Next Page
Loading...
Need help?
General
