193
Advanced operations
6
SET ORIGIN
*OK?
Carriage stops moving.
7
SET ORIGIN
OK?
Press the OK button to set the origin.
The carriage returns, and the printer enters online state and
becomes ready to print.
SETTING ORIGIN...
PLEASE WAIT
PRINTER READY
01: PAPER / 1626mm
During origin setting mode, a symbol is displayed next to
the paper width value.
Exit origin setting mode
To cancel an origin that has been set, reinstall the media, or exit the origin setting mode following the procedure
below.
1
PRINTER READY
01: PAPER / 1626mm
Press the Left button when the printer is
online in origin setting mode.
2
CANCEL ORIGIN
OK?
Press the OK button to exit origin setting
mode.
3
PRINTER READY
01: PAPER / 1626mm
The symbol disappears.
Before printing Loading the media Adjustment Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix
To Next Page
Loading...
