Oki IP-6620 - Procedure to Load Transparent Media and Media with a Black Reverse Side

56
Loading the media
6
>>MISC SETTINGS
2
REMAINING MEDIA
Press the Down button to select REMAIN
MEDIA MONIT.
7
>>MISC SETTINGS
2
REMAIN MEDIA MONIT
Press the OK button.
8
>>>REMAIN MEDIA MONIT
2
OFF
Press the Down button once.
9
>>>REMAIN MEDIA MONIT
2
ON
Press the OK button.
10
>>>REMAIN MEDIA MONIT
2
ON

Set ON for REMAIN MEDIA MONIT in one of the following cases:
- You want to enter the amount of remaining media when loading the media.
- You want to print the amount of remaining media with this function.
Procedure to load transparent media and media with a black reverse side
Congure the settings as follows when loading transparent media and media with a black reverse side.
Note

Media end of transparent media or media with black reverse side cannot be detected.
It is therefore recommended to use media whose end is stuck to the roll with glue.
1
PRINTER READY
01: PAPER/1626mm
Press the MENU button.
2
MENU
2
INFORMATION
Press the Down button to select EDIT MEDIA
PRESETS.