Oki IP-6620 - Media Edge Guard Cleaning

135
Maintenance
9
CHECK PRINT HEADS
THEN CLOSE COVERS
Close the maintenance area cover and the
front cover.
10
CARRIAGE IS MOVING
PLEASE WAIT
Carriage stops moving.
>PH MAINTENANCE
2
SET PH FOR CHECK
Media edge guard cleaning
1
If a media is installed, remove it.
2
Open the front cover.
3
Soak a cleaning swab in the cap cleaning
liquid.
TIP

To keep the cap cleaning liquid clean, do not soak the
cleaning swab in the cap cleaning liquid bottle again
after you have cleaned the edge guards with it.

The cleaning swab is intended for a single use only.
Use a new cleaning swab for each cleaning.
4
Media edge guard
PET sheet
Apply the cap cleaning liquid to the stains of
the media edge guard and PET sheet.
Before printing Loading the media Adjustment
Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix